Accesorios |
| |
| |
| |
|
Current Relay Switches - NEW
When used with the MadgeTech family of State Recorders*, the status change data- "ON/OFF" can be recorded with a time and date stamp to provide equipment usage information. This data is essential to determine the duration of a particular event or to calculate the cost of power. They enable the assessment of equipment and lights, servicing or repairs, in the detection of defective equipment, short-cycling. |
| |
| |
| |
| |
|
IFC110 - Serial Interface Cable w/3.5mm Audio Jack Connector & Software Package
The IFC110 is a serial (RS-232) interface cable with a 3.5mm, 3-pin audio jack connector. The IFC110 provides a serial interface to the majority of MadgeTech data loggers. The IFC110 includes the interface cable as well as the software and manual.
|
| |
| |
| |
| |
|
|
IFC200 - USB Interface Cable & Software Package
The IFC200 is a USB interface package. The IFC200 provides a USB interface to the majority of MadgeTech data loggers without the need for seperate USB-Serial converter. The IFC200 communicates directly with the MadgeTech software, eliminating the need for complicated virtual COM port setup. The IFC200 includes the interface cable with a 3.5mm audio jack cable, device drivers, data logging software, software manual and IFC200 quick installation guide. The IFC202 includes the IFC200 plus an adapter for use with our Micro Series devices.
|
| |
| |
| |
| |
|
IFC202 - USB Interface Cable with mini-plug & Software Package
The IFC202 includes the IFC200 plus an adapter with a 2.5mm audio jack for use with our Micro Series devices. The IFC200 provides a USB interface to the majority of MadgeTech data loggers without the need for seperate USB-Serial converter. The IFC200 communicates directly with the MadgeTech software, eliminating the need for complicated virtual COM port setup. The IFC200 includes the interface cable with a 3.5mm audio jack cable, device drivers, data logging software, software manual and IFC200 quick installation guide.
|
| |
|
| |
|
| |
|
| |
|
|
IFC103 - Serial Interface Cable w/Card Edge Connector & Software Package
The IFC103 is a serial (RS-232) interface cable with a 10-pin card edge connector. The IFC103 provides a serial interface to the Transitemp-EC data loggers. The IFC103 includes the interface cable as well as the software and manual.
|
| |
| |
| |
| |
|
IFC102 - Serial Interface Cable w/2.5mm Audio Jack Connector & Software Package
The IFC102 is a serial (RS-232) interface cable with a 2.5mm, 3-pin audio jack connector. The IFC102 provides a serial interface to MadgeTech's Micro Series data loggers. The IFC102 consists of the interface cable and also includes the latest software and manual.
|
| |
| |
| |
| |
|
USB-1 - USB to RS232 Converter
If there are no serial ports available on your computer, use the USB-1 to connect any of the MadgeTech interface cables directly into your USB port. This is the ideal solution for laptops without a serial port.
|
| |
| |
| |
| |
|
RFC101A
Radio frequency receiver for wireless, RF series data recorders, includes software, manual, power supply and RS232 (IFC110) computer interface cable.
|
| |
| |
| |
| |
|
RFEXT-BASE
RF extender base "PC EXPANSION PACK" Includes (1) wireless transceiver module, (1) antenna, (1) wall-mount power supply, (1)DB9 serial extension cable (for PC) and (1) software CD.
|
| |
| |
| |
| |
|
RFEXT-EXPANSION
RF extender, "EXPANSION MODULE" Includes (1) wireless transceiver module, (1) antenna, (1) wall-mount power supply, (1) remote interface cable (for data logger), and (1) DB9 serial expansion cable (for PC).
|
| |
| |
| |
| |
|
RFEXT-KIT
RF Extender Kit, "STARTER KIT" includes (2) wireless transceiver modules,(2)antennas,(2)wall-mount power supplies,(1)remote interface cable(for data logger), (1)DB9 serial extension cable (for PC), and (1) software CD.
|
| |
| |
| |
| |
|
RFEXT-REMOTE
RF extender remote, "LOGGER EXPANSION PACK" Includes (1) wireless transceiver module, (1)antenna, (1)wall-mount power supply, and (1)remote interface cable(for data logger).
|
| |
| |
| |
| |
|
HydroVault - NEMA 4X/6P Fiberglass Enclosure for TC4000/TC110
The HydroVault is a submersible fiberglass enclosure. It has a silicone-gasketed cover and is sealed water-tight with stainless steel screws. The thermocouple wire extends out of the enclosure and is exposed to the elements for fast response times while the data logger device remains protected within its enclosure.
|
| |
| |
| |
| |
|
Thermocouples
MadgeTech offers many different types of thermocouples to connect directly to the TC4000, QuadTemp and OctTemp data loggers.
|
| |
| |
| |
| |
|
RTD's
MadgeTech offers a variety of RTD probes to fit your application. These RTD proves directly connect to the RTDTemp101, RTDTemp110, QuadaTemp and OctTemp data loggers. For directions on connecting your RTD probe to any of our RTD loggers, please consult the Quick Start Guide.
|
| |
| |
| |
| |
|
pH-1 - pH Electrode
- Clear epoxy-bodied, gel-filled combination ALphA electrodes
- Covers entire 0 to 14 pH range
- 95% response in less than 1 second
- 0 ºC to 100 ºC
- Soaker storage bottle
|
| |
| |
| |
| |
|
LTC-3PN - 3.6V Lithium Battery
- 350 mAH
- 0.65" x 0.60" x 0.27"
|
| |
| |
| |
| |
|
LTC-7PN - 3.6V Lithium Battery
- 750 mAH
- 0.65" x 1.0" x 0.27"
|
| |
| |
| |
| |
|
TL-2150 - 3.6V Lithium 1/2 AA Battery with Axial Leads
- 950 mAH
- 0.99" x 0.66" diameter
|
| |
| |
| |
| |
|
U9VL-J - 9V Lithium Battery
- 1200 mAH
- 1.9" x 1.2" x 0.67"
|
| |
| |
| |
| |
|
CR1225 - 3V Lithium Battery
- 50 mAH
- 0.098" x 0.492" diameter
|
