|
DNA-FPPC5 |
|
5-layer, Fiber Optic I/O, Data Acquisition and Control Cube with PowerPC CPU |
|
|
|
The DNA-FPPC5 Cube is a compact, rugged, 100Base-FX based DAQ interface. Its flexibility allows you to configure one or more cubes to match the specific I/O requirements of your application. The PowerDNA Cube is ideally suited for a wide variety of industrial, aerospace and laboratory data acquisition and control applications. The Fiberoptic network interface allows the cube to be located up to 2 kilometers from the host computer. A single mode fiber interface is available as a special order allowing ranges up to 20 kilometers.
The heart of every PowerDNA system is the Cube. The Cubes are 4” x 4.1” x 4”, include 3 I/O slots and are packed with power and flexibility. Each I/O Cube consists of two primary subsections. The top level of the cube provides the Cube Controller, Network Interface and power supply. The lower levels of the cube provide I/O slots. With over 30 different I/O boards available, PowerDNA is sure to offer a configuration perfectly matched to your application.
The PowerDNA Cube is supported by all popular Windows, Vista, Linux and Real-time operating systems. Our UEIDAQ Framework provides a simple and universal API and supports all common programming languages. The Cube is also fully supported by an extensive array of application packages including LabVIEW, MATLAB, DASYLab and more. The embedded Linux tool kit allows users to develop custom DAQ and control applications on their PC and then deploy them to run standalone on PPC series cubes (call for availability of this toolkit).
Whether your application requires a few I/O channels or a few thousand, the PowerDNA cube is an ideal solution. The Cubes’ unique combination of flexibility, compact size, mechanical and electrical ruggedness and ease of use is unparalleled. |
|
Characteristics: |
- Slots for 3 I/O boards
- Over 30 I/O boards available
- 100Base-FX Fiber Interface
- Operates up to 2 km from host
- Inter-Cube sync interface
- Compact: 4" x 4.1" x 4"
- Rugged: Tested -40 to +85 °C, 5g vibration, 50g shock
- Real-time: 1000 I/O scans in < 1 millisecond
- Complete Windows, Vista, Linux and RT OS support
- LabVIEW, MATLAB, DASYLab support and more
|
|
Technical Specifications |
Standard Interfaces |
To Host Computer |
100Base-FX, standard fiber SC connector |
Daisy chain output |
100Base-FX, standard fiber SC connector |
Config/General |
RS-232, 9-pin “D” |
Sync |
Custom cable to sync multiple cubes |
I/O Slots Available |
DNA-FPPC5 |
3 slots |
Host Communications |
Distance from host |
2 kilometers max (20km single mode option) |
Ethernet data transfer rate |
2 megabyte per second |
Analog data transfer rate |
up to 1 megasample per sec (16-bit samples) |
DMAP I/O mode |
update 1000 I/O channels (analog and/or digital) in less than 1 millisecond, guaranteed |
Processor |
CPU |
Freescale MPC5200, 400 MHz, 32-bit |
DDRAM |
128 MB |
On-board Flash |
4 MB |
Status LEDs |
Attention, Read/Write, Power, Communications Active |
Environmental |
Temp (operating) |
Tested to -40 °C to 85 °C |
Temp (storage) |
-40 °C to 100 °C |
Humidity |
0 to 95%, non-condensing |
Vibration |
(IEC 60068-2-64) |
10–500 Hz, 5 g (rms), Broad-band random |
(IEC 60068-2-6) |
10–500 Hz, 5 g, Sinusoidal |
Shock |
(IEC 60068-2-27) |
50 g, 3 ms half sine, 18 shocks at 6 orientations;
30 g, 11 ms half sine, 18 shocks at 6 orientations |
Altitude |
70,000 feet, maximum |
Physical Dimensions |
DNA-FPPC5 |
4.1” x 4.0” x 4.0” |
|