Technical Specifications |
Standard Interfaces |
Gigabit Ethernet |
Two independent 1000/100/10Base-T interfaces, each with a unique IP address (connected via standard RJ-45 connectors) |
USB 2.0 |
Two ports, one controller, one slave |
Config/General |
RS-232, 9-pin “D” |
Sync |
Custom cable to sync multiple cubes |
I/O Slots Available |
DNA-PPC5-1G |
3 slots |
Host Communications |
Distance from host |
100 meters max, CAT5+ cable |
Ethernet data transfer rate |
20 megabyte per second |
Analog data transfer rate |
>6 megasample per second. Capable of sustained transfer of any cube configuration |
DMAP I/O mode |
update 1000 I/O channels (analog and/or digital) in less than 1 millisecond, guaranteed |
Processor |
CPU |
Freescale 8347 series, 400 MHz, 32-bit |
Memory |
128 MB (not including on-board Flash) |
Status LEDs |
Attention, Read/Write, Power, Communications Active |
Environmental |
Temp (operating) |
Tested to -40 °C to 85 °C |
Temp (storage) |
-40 °C to 100 °C |
Humidity |
0 to 95%, non-condensing |
Vibration |
(IEC 60068-2-64) |
10–500 Hz, 5 g (rms), Broad-band random |
(IEC 60068-2-6) |
10–500 Hz, 5 g, Sinusoidal |
Shock |
(IEC 60068-2-27) |
50 g, 3 ms half sine, 18 shocks at 6 orientations;
30 g, 11 ms half sine, 18 shocks at 6 orientations |
Altitude |
70,000 feet, maximum |
MTBF |
300,000 hours |
Physical Dimensions |
DNA-PPC5-1G |
4.1” x 4.0” x 4.0” |
Power Requirements |
Voltage |
9 - 36 VDC (AC adaptor included) |
Power Dissipation |
13 W at 24 VDC (not including I/O boards) |