Logicbus/Productos/Ethernet/PowerDNA Cubes/DNA-PPC8-1G

Productos->Ethernet->PowerDNA Chassis->DNA-PPC8-1G

DNA-PPC8-1G

8-layer enclosure; room for 6 I/O layers; CPU + GigE/1000Base-T NIC; PowerPC 400 Mhz CPU; 24V (100 W) power supply, and FAN option

The PowerDNA® (Distributed Networked Automation) Cube is a compact, rugged, Gigabit Ethernet-based DAQ interface. Its flexibility allows you to configure one or more cubes to match the specific I/O requirements of your application. The PowerDNA Cube is ideally suited for a wide variety of industrial, aerospace and laboratory data acquisition and control applications. The heart of every PowerDNA system is the Cube. The PowerDNA DNA-PPC8-1G Cube is 4" x 4" x 5.8" (6 I/O slots). Each I/O Cube consists of two primary subsections: a Core Module and I/O slots or layers.

Characteristics:

Slots for 6 I/O boards
Over 30 different I/O boards available
Two independent Gigabit (1000/100/10Base-T) Ethernet Interfaces One port for Control, the second for diagnostics
Two USB 2.0 ports (one controller & one slave)
Inter-Cube sync interface
Rugged: 50 g shock, 3 g Vibration, -40 to +70°C, 0 - 16,000 feet
Compact: 4" x 4.1" x 5.8"
Real-time: 1000 I/O scans in < 1 millisecond
Complete Windows, Linux and RT OS support
LabVIEW™, MATLAB®, DASYLab&trade, Simulink® support and more
Standalone deployment as UEIPAC, UEISim or UEIModbus

Technical Specifications
Standard Interfaces
Gigabit Ethernet	Two independent 1000/100/10Base-T interfaces, each with a unique IP address (connected via standard RJ-45 connectors)
USB 2.0	Two ports, one controller, one slave
Config/General	RS-232, 9-pin “D”
Sync	Custom cable to sync multiple cubes
I/O Slots Available
DNA-PPC8-1G	6 slots
Host Communications
Distance from host	100 meters max, CAT5+ cable
Ethernet data transfer rate	20 megabyte per second
Analog data transfer rate	>6 megasample per second. Capable of sustained transfer of any cube configuration
DMAP I/O mode	update 1000 I/O channels (analog and/or digital) in less than 1 millisecond, guaranteed
Processor
CPU	Freescale 8347 series, 400 MHz, 32-bit
Memory	128 MB (not including on-board Flash)
Status LEDs	Attention, Read/Write, Power, Communications Active
Environmental
Temp (operating)	Tested to -40 °C to 85 °C
Temp (storage)	-40 °C to 100 °C
Humidity	0 to 95%, non-condensing
Vibration
(IEC 60068-2-64)	10–500 Hz, 5 g (rms), Broad-band random
(IEC 60068-2-6)	10–500 Hz, 5 g, Sinusoidal
Shock
(IEC 60068-2-27)	50 g, 3 ms half sine, 18 shocks at 6 orientations; 30 g, 11 ms half sine, 18 shocks at 6 orientations
Altitude	70,000 feet, maximum
MTBF	300,000 hours
Physical Dimensions
DNA-PPC8-1G	4.1” x 4.0” x 5.8”
Power Requirements
Voltage	9 - 36 VDC (AC adaptor included)
Power Dissipation	13 W at 24 VDC (not including I/O boards)

Productos

Categorías

Marcas

DNA-PPC8-1G