| Productos->PCI->14 y 16 de resolución->PCI-DAS6036 |
PCI-DAS6036 |
| |
Low-cost, 16-channel, 200 kS/s analog I/O boards with two 16-bit analog outputs, eight digital I/O, and two counter/timers |
|
| |
- Functionally equivalent to National Instruments PCI-6036E
- 16 channels of 16-bit A/D resolution
- 200 kS/s maximum sample rate
- 2 channels of 16-bit D/A at 10 kHz
- 8 bits DIO
- 2 16-bit counters
|
General Description
The PCI-DAS6036 from Measurement Computing is an accurate and powerful measurement instrument that plugs into any PCI slot in your computer. Combined with powerful software, it turns your personal computer into a measurement system that may be used to automate experiments, construct product test stands, monitor and control production equipment or be embedded in products such as airport security systems and jet fighter test simulators.
Measurements of up to 16 channels at a resolution of 16 bits, one part in 65,536 on one of 4 ranges may be taken at rates up to 200,000 samples per second. Dual analog outputs (two) of 16 bits resolution may be updated at rates to 10 kHz per channel. Discrete digital bi-directional I/O lines (8) can control relays and solenoids, and monitor switch and contact closures.
Simple and complex triggering of measurements is handled by the several types of trigger signal inputs and the powerful programmable trigger logic of the board. Digital events may be used to initiate both measurement (input) and control (output) processes. Powerful software translates a complex capability into simple-to-understand and configure parameters.
Synchronization of several measurement boards comprising a single measurement and control system is handled by precise inter-board synchronization signals and on-board logic. Software makes it simple to configure and use.
Software for professional developers, occupational developers and non-programming measurement professionals completes your system. Choose from a variety of powerful options, or choose multiple packages and use the one suitable to each task..
Analog Input Accuracy 200 kS/s sampling rate, single-channel operation and a 15-minute warm-up. Accuracies listed are for measurements made following an internal calibration. They are valid for operational temperatures within ±1°C of internal calibration temperature and ±10°C of factory calibration temperature. Calibrator test source high side tied to Channel 0 High and low side tied to Channel 0 Low. Low-level ground is tied to Channel 0 Low at the user connector.
|
| |
Table 1 - Absolute Accuracy |
|
| Range |
Absolute Accuracy |
| ±10V |
±10.2 LSB |
| ±5V |
±10.9 LSB |
| ±500mV |
±19.7 LSB |
| ±50mV |
±40.6 LSB |
|
| |
Table 2 - Absolute Accuracy Components - All values are (±) |
|
| Range |
% of Reading |
Offset (µV) |
Averaged Noise + Quantization (µV) |
Temp Drift(%/DegC) |
Absolute Accuracy at FS (mV) |
| ±10V |
0.0239 |
531 |
180 |
0.001 |
3.10 |
| ±5V |
0.0262 |
274 |
85 |
0.001 |
1.67 |
| ±500mV |
0.0467 |
54 |
12.3 |
0.001 |
0.30 |
| ±50V |
0.0685 |
21.2 |
6.54 |
0.001 |
0.062 |
|
Table 3 - Relative Accuracy - All values are (±) |
|
| All ranges |
±0.5 LSB typ |
±1.0 LSB max |
|
| |
|
General Accessories
The I/O board used in the accessory photos is not a PCI-DAS6036. It is a representative board with the same connector.
|
| |
| Cable/Screw Terminal Options |
|
| Cable/BNC Terminal Options |
|
| External Signal Conditioning
|
|
